仿真分析Simulated analysis
最终检测Final inspection
DUTs：1 pcs
冷启动导致电压不足undervoltage due to cold cranking
工作模式台架测试 Working mode bench test
接地抵消Ground Offset
过放保护Overdischarge Protection
PACK电性能测试 PACK electric performance test
容量测试Capacity test
PACK安全测试 PACK safety testtest
倍率充放电 Rate charge and discharge
振动测试Vibration《GB 38031-2020》
过流保护Over Current Protection
接地偏移Ground loss
热管理性能测试 Thermal management performance test
机械冲击Mechanical shock（150g15ms&60g45ms）
无负载容量损失及恢复测试 No load capacity loss and recovery test
DUTs：3 pcs
高低温寿命High/LowTemperature Aging
过温保护Over Temperature Protection
PACK功能测试 PACK functional test
初始检测incoming inspection
过压保护Over Voltage Protection
均衡功能及均衡电流 Equalization function and current equalization
挤压Crush
短路能力和信号Short circuit power and signal
